EUROVOX STBs

Using your remote do this..

MENU
LANGUAGE
HIGHLIGHT THE SECOND ONE DOWN ON THE LIST
TYPE 1968
CLICK 'OK'


SCROLL TO THE LEFT, UNTIL YOU CAN SEE THE WORD NAGRAVISION ON THE TOP OF THE PAGE.

GO INTO THE FIRST CODE AND YOU WILL SEE WHERE THE KEYS GO

ENTER KEYS AND THEN PRESS THE BLUE BUTTON.

Posted by Stampeo:

BETTER WAY TO MANUALLY CHANGING CODES FOR THE EUROVOX

Press menu on the remote,press the yellow button(TEXT)
Provider=54 01 for NTL ... 5E 01 for chorus
Key 00-key in tne codes for 00
Key 01-key in the codes for 01
using the remote use these butoons for the numbers in the codes
TV= A, RADIO= B, P-=C, P+= D, INFO= E, RECALL= F.
press ok to save and exit to a tv station



STARVIEW STBs

fook knows where i got this from ... Just found it on my HDD ..thanks to original poster:


To put keys in manualy do as follows.
Press menu button


Press 1570 this takes you into secret menu.
Now hit ok on nagravision

Next make sure your cable provider is listed at top NTL or TELEWEST C&W ect

Now change key 00
(YOU MUST SAVE EACH KEY INDIVIDUALLY - I.E. AFTER CHANGING KEY 00 MAKE SURE
YOU STORE BEFORE CHANGING KEY 01 (TO STORE PRESS OK)


Right now change key 01 (To change between the 2 keys highlight key number press right and left )

Please Dont forget to store key again press ok

DREAMBOX STBs
Posted by Davido123 at Digitalworldz.co.uk.

Just got this from Zeus over at Dreambox Magic
Emergency Key Change
1. Press Yellow
2. Select Tuxbox Commander
3. Press down arrow (9 Times) until you highlight "var" in LEFT window.
4. Press OK
5. Press down arrow (3 Times) until you highlight "keys"
6. Press OK
7. Press down arrow (4 Times) until you highlight "Keylist.txt"
8. Press 4 (to edit the file)
9. You will now see the keylist. First line beginning with 00 needs to be changed slightly. The sequence 00 F57*****D352D**** (You will not see any * but they will be number do not touch them)
10. Press OK to select the line to edit.
11. Press Right arrow 19 times to you highlight the "5" and change it to an "F" by pressing "3" until your get "F"
12. Press OK to make the change.
13. Press Exit
14. Press Red (to save changes)
15. Press Exit
16. Press Red (to save changes)
17. Press Exit
18. Now that’s done lets restart Evocam – Press Blue Button
19. Press OK
20. Done



KRYPTVIEW STBs

Channel 6001 -

DBOX STBs

Posted by aandrew at All-forums.co.uk:

Using remote

1. Press the blue button and you will be in the features menu, scroll to Tuxbox Commander, press OK.

You should now be looking at the files on the D Box.

2. Scroll to VAR and press ok, If you don’t see VAR, scroll to <DIR> & press ok, if you still don’t see VAR scroll to the next <DIR> and press ok, keep doing this until VAR appears on the screen

3. When you find the VAR file and you press OK, scroll to Keys & press OK

4. Scroll to Keylist.txt and press 4 on your remote control! It is important that you don’t press OK when you scroll to keylist.txt , you must press 4 in order to edit the code that will appear! If you pressed OK in error , just press the Home button and start again.

5. After pressing 4 you should be looking at a screen with /var/keys/keylist.txt at the top, 4 or 5 codes in the middle and numbers 1 to 9 at the bottom.

6. Now you need to scroll to the code that you are going to change.

7. When you have have scrolled to code you want to change press OK, When you press OK, the code becomes slightly larger and the first digit changes colour to red, this is now your cursor! thats it